Advertisement
· Features
1. 4K@60Hz resolution and backwards compatibility
2. Support 4 HDMI signal input, and extend the HDMI signal to 70 meters
through CAT6 and above network cables
3. RJ45 output to transmit HDMI signals to receiver
4. Multiple switching modes: IR remote control, button, RS-232
5. Support KVM control signal passback
6. EDID passthrough and auto downscaling
7. HDR10 supported
8. Lightning protection, surge protection, ESD protection
· Package Contents
Transmitter x1
Power 5V1A x2
Grounding Screw x4
USB Type A to
Type B Cable x4
Receiver x1
User manual x1
Remote Control x1
Screw x10
Mounting Ear x4
Terminal Block x1
3
· Installation Requirements
1. HDMI source device (DVD, game console, set top box, PC, etc.)
2. HDMI display device like TV, projector with HDMI port
3. HDMI cable: Standard HDMI 2.0 cable (Support 4Kx2K@60Hz)
4. CAT6 and above network cable
· Panel Description
1. Transmitter（TX）
①
②
⑤
①
Reset
Press the reset key to restart the device
② RJ45 output
Connect with CAT6/6A/7 network cable
Light off: the computer and the USB port have
not established a connection
③
Steady on: the computer and the USB port are
KVM indicator (blue)
connected
Light flashing: the KVM data is transmitting
Light off: no power
Slow flash (every 1 second): there is power, but
Power/Signal indicator
no HDMI signal
④
(orange)
Quick flash (every 200ms): the HDMI signal is
connecting
Steady on: the HDMI signal is transmitting
③ ④
⑥
⑦
4
Advertisement
