HDMI Extender OVER NETWORK
User's manual
• Introduction
This HDMI extender over cat6 extends the HDMI content up to 60
meters for 1080p.
• Important safety notice
1. Do not mix up HDMI to RJ45 sender and RJ45 to HDMI receiver before
installation.
2. Do not hot plug when it is working.
3. Use DC5V power supply only. Make sure specification matched if using
adapters not supplied by factory.
• Package Contents
HDMI to RJ45
RJ45 to HDMI
sender TX*1pcs
receiver RX*1pcs
DC5V1A*2pcs
IR blaster extension
cable *1pcs
• Installation Requirements
1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring
equipment etc).
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. UTP/STP cat6/6A/7 cable, follow standard IEEE-568B.
• Panel Description
1. HDMI to RJ45 transmitter
①
②
①
HDMI signal output
②
HDMI signal indicator led
It lights on all the time with
HDMI signal input, flashes
with no signal input.
③
HDMI signal input
2. RJ45 to HDMI receiver
User manual*1pcs
IR receiver extension
cable*1pcs
①
②
①
Reset
②
RJ45 signal input
③
RJ45 indicator led
It lights on all the time with HDMI
signal transmission, flashes with
no signal transmission.
③
④
⑤
⑥ ⑦
④
IR signal output to connect
with blaster extension cable
⑤
RJ45 signal output
⑥
Reset
⑦
DC5V power input
③
④
⑤
⑥
④
DC5V power input
⑤
HDMI signal output
⑥
IR signal input to connect with
IR receiver extension cable