Setup - Honeywell Midas S2 User Manual

3.6 Setup

From the Setup Operations menu, you can configure passcode, alarms, fullscale, relays, faults,
calibration interval, bump test interval, Line Integrity Test interval, date & time, network, pump
control, location label, and display.
1. Go to the Monitoring mode.
2. Press
3. Press
4. Optional Step: Press
Table 3-5: Setup Operations menu
Option
Passcode
Alarms
Fullscale
Relay
Faults
Calibration interval
Bump Test interval
LIT (optional)
Date/Time
Midas S2
and select Setup Operations, and then press
or to scroll the options, and then press
to cancel and return one step back.
Operations you can Setup from selected option
Enable
l
l Disable
l Change passcode (when set already)
Gas type
l
Alarm 1 type and level
l
Alarm 2 type and level
l
Deadband enable/disable
l
Alarm latching/non-latching
l
Alarm delay time
l
Relay configuration
l
l Alarm relay (Energized/De-energized)
l Fault relay (Energized/De-energized)
Latching/Non-latching
l
Maintenance fault enable/disable
l
Temperature fault enable/disable
l
The calibration interval in days
The bump test interval in days
Line leak test (enable/disable)
l
LIT interval (8-72 hours)
l
Date
l
Date format (YYYY MM DD, DD MM YYYY, MM DD YYYY)
l
to enter the menu.
to accept it.
29 User Manual