Toro REELMASTER 6700-D Operator's Manual page 20

determined in step 1.
3. Operate the machine for several days, then examine the
cut to ensure satisfaction with the quality of cut. The
height-of-cut knob may be set one position on either side
of the position on the chart to account for differences in
grass condition, grass length removed, and personal pref-
erence of the superintendent. For a cut with more grass
removed but slightly more clip visibility, move the
height-of-cut selector knob one position higher than spec-
ified. For a cut with less grass removed and slightly less
clip visibility, move the height-of-cut selector one posi-
tion lower than specified.
Full Speed—There may be times when it is desirable for the
reels to run at full speed regardless of the machine's traction
speed. Examples of this are vertical cutting or heavy scalping.
In such cases, the height-of-cut selector knob may be set to
position "A" which will command the machine controller to
run the reels at full speed at all times.
20