Table of Contents
Advertisement
Setting the Brightness of the Display
(BRIGHTNESS)
Ten levels of brightness can be selected for the organic
light-emitting diode display.
The selectable settings are the following:
(Dark) 1 2 3 4 5 6 7 8 9 10 (Bright)
Automatic Dimming of the Display
(DIMMER MODE)
The organic light-emitting diode display can be set to dim
or turn off after a certain amount of time.
AUTO OFF: The display turns off after 30 seconds. The
display goes on again when you press the SET, +, or –
button.
AUTO DIMMER: The display dims after 30 seconds. The
display becomes bright again when you press the SET, +,
or – button.
ALWAYS ON: The display stays on at the brightness
level set with the BRIGHTNESS function.
Resetting Parameters to their
Factory Settings
(FACTORY PRESET)
All parameter settings can be returned to their factory
settings.
Holding down the SET button until a message appears
asking for confirmation. Press the + or – button repeatedly
to select YES, and then press the SET button to enter. The
receiver parameters are reset to their factory settings.
Displaying the Software Version
(VERSION)
The version of the receiver software can be displayed.
RX (tuner) 1/2 Menu
For details on menu operation, see “Basic Menu
Operations” on page 11.
Use this menu to set the digital wireless receiver functions
(the main functions of this receiver).
The following shows the US model display.
Menu name
Function name
*
Item to be set
* The antenna currently selected by the diversity function is indicated by “a”
or “b”.
Group/Channel Selection
(GP/CH)
See “Carrier Frequencies and Channel Steps” on page 24
for factory settings.
For details, see“Selecting the Frequency Band / Group /
Channel” on page 6.
Frequency Band Selection
(BAND)
See “Carrier Frequencies and Channel Steps” on page 24
for factory settings.
For details on the groups and channels included in each
frequency band, refer to “Sony Digital Wireless
Microphone System Frequency Lists” on the supplied CD-
ROM.
Active Channel Scanning Function
(ACT CH SCAN)
The active channel scan function operates.
For details, see “Using the Active Channel Scan
Function” on page 7.
Clear Channel Scan Function
(CLR CH SCAN)
The clear channel scan function operates.
For details, see “Using the Clear Channel Scan Function”
on page 7.
Page 13
Advertisement
Table of Contents
