8-3.
Typical Connection For Voltage-Sensing Feeder GMAW/FCAW/FCAW-S Process
1
3
4
5
10
9
2
8
Ref. 292684-A
Turn off power before making
connections.
1 Positive (+) Weld Output Terminal
2 Negative (-) Weld Output Terminal
3 Ground Cable to Workpiece
4 Workpiece
5 Voltage Sensing Clamp
6 Gun
7 Gun Trigger Receptacle
8 Wire Feeder
9 Gas Hose
10 Gas Cylinder
Use of shielding gas is dependant on Wire
Type.
�
The connection diagram illustrates
DCEP (reverse polarity) suitable for all
wires except self-shielded FCAW-S.
The majority of self-shielded FCAW-S
wires require DCEN (straight polarity).
7
6
OM-292663 Page 31