Typical Connection For Voltage-Sensing Feeder Gmaw/Gmaw-P/Fcaw Process - Miller Auto-Line XMT 350 MPa Owner's Manual

8-7.

Typical Connection For Voltage-Sensing Feeder GMAW/GMAW-P/FCAW Process

3
4
804843-C
Turn off power before
connections.
1 Positive (+) Weld Output Terminal
2 Negative (-) Weld Output Terminal
3 Ground Cable to Workpiece
4 Workpiece
5 Voltage Sensing Clamp
OM-231242 Page 38
�
Complete Parts List is available at www.MillerWelds.com
1
2
5
6 Gun
making
7 Gun Trigger Receptacle
8 Wire Feeder
9 Gas Hose
10 Gas Cylinder
10
9
8
7
6
Use of shielding gas is dependant on Wire
Type.
�
The connection diagram illustrates
OM-231242 Page 23
DCEP (reverse polarity) suitable for all
wires except self-shielded FCAW. The
majority of self-shielded FCAW wires
require DCEN (straight polarity).