Table of Contents
Advertisement
English
NOTICE:
You hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
1 Hold down the PTT button longer than the
preprogrammed time.
You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until
you release the PTT button.
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up
solid red.
Time and Date Setup
You can set the time and date for your radio.
Settings:
•
The default time setting is a 12-hour clock. The display
shows 12:00AM.
164
•
The AM/PM selection is not available for the 24-hour
clock setting.
•
The default setting for the domestic date shows MDY.
NOTICE:
Check with your dealer or system administrator for
additional programmable settings for this feature.
Editing the Time and Date
1
or to Clck.
2 Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit.
The first item blinks.
4 Perform one of the following actions:
•
or
to change the selected item.
•
or one or more times to move to an item you
wish to change.
item.
or
to change the selected
Advertisement
Table of Contents
