Table of Contents
Advertisement
English
Making an Enhanced Private Call
(Trunking Only)
Your radio must be preprogrammed to allow you to use this
feature.
This feature allows you to send an individual Call Alert
Page if there is no answer from the target radio. See
Sending a Call Alert Page on page 84
information.
1 Perform one of the following actions:
•
To access this feature using a preprogrammed
button, press the preprogrammed Quick Access
(One-Touch) Enhanced Private Call button to
dial the preprogrammed ID (number) and initiate
the Private Call. Proceed to
•
or to Call, and press the Menu Select button
directly below Call.
The display shows the last transmitted or
received ID.
2 To select the required ID, perform one of the
following actions:
64
for more
step
4.
•
Press the Menu Select button directly below
Cnts to scroll through and select the required ID.
•
Press the Menu Select button directly below
LNum to go to the last number dialed.
•
or
to the required ID.
3 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
When you are connected, the display shows the ID
of the target radio.
If no acknowledgment is received, the display shows
No acknowledge.
If the target radio does not respond before the time
out, the display shows No answer.
5 Press and hold the PTT button to talk. Release the
PTT button to listen.
6 Press
to return to the Home screen.
Advertisement
Table of Contents
