Dispensing Milk Froth; Dispensing Hot Water; Drink Settings - Siemens EQ500 classic TP51 Series Information For Use

en operation
8.8 Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Requirements
The milk tube is connected.
¡
The suction pipe is connected.
¡
Insert the suction pipe in the milk,
1.
e.g. Tetra Pak carton.
Place your pre-warmed cup under
2.
the outlet system.
Press repeatedly until the dis-
3.
play shows "Milk froth".
Change the setting if necessary:
4.
To adjust the per-cup quantity,
‒
press .
→ "Adjusting the amount",
Page 53
Press ⁠ .
5.
The milk froth will run out of the
a
outlet system.
Press to stop the dispensing
6.
process.
8.9 Dispensing hot water
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Note: If the milk system has not been
cleaned, small amounts of milk may
be dispensed with the water.
52
Requirements
The milk system has been
¡
cleaned. .
The milk tube has been removed.
¡
Place your pre-warmed cup under
1.
the outlet system.
Press repeatedly until the dis-
2.
play shows "Hot water".
Change the setting if necessary:
3.
To adjust the per-cup quantity,
‒
press .
→ "Adjusting the amount",
Page 53
Press ⁠ .
4.
If the following message appears:
"Please remove suction hose.", re-
move the milk tube and press
Hot water will run out of the outlet
a
system.
Press to stop the dispensing
5.
process.
8.10 Drink settings
Prepare a drink according to your
taste.
Adjusting the coffee strength
Press the symbol for your desired
1.
drink.
To select the strength of the cof-
2.
fee, press ⁠ .
You can select the following coffee
strengths:
– "mild"
– "regular"
– "strong"
– "very strong"
– "doubleshot"
Note: The setting "doubleshot" is
not available for every drink and
drink volume.
Tip: For a strong taste of coffee,
select a high coffee strength when
setting a large capacity.
⁠ .