Dispensing Coffee Drinks With Milk Froth; Dispensing Special Drinks; Dispensing Milk Froth - Siemens EQ500 integral TQ51 Series Information For Use

8.7 Dispensing coffee drinks
with milk froth
Requirements
The milk container has been con-
¡
nected.
The milk container has been filled
¡
with sufficient milk.
Place your pre-warmed cup under
1.
the outlet system.
Press the symbol for a coffee drink
2.
with milk.
The display will show the drink and
a
your current settings.
→ "Drink settings", Page 54
Change the settings where neces-
3.
sary:
To adjust the per-cup quantity,
‒
press .
→ "Adjusting the amount",
Page 54
To adjust the coffee strength,
‒
press .
→ "Adjusting the coffee
strength", Page 54
Use the ground coffee compart-
‒
ment.
→ "Dispensing a coffee drink
made from ground coffee",
Page 51
Press and wait until the pro-
4.
cess is complete.
After preparing the drink, the milk
system will automatically clean it-
self with a short jet of steam.
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
8.8 Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
Press several times.
▶
→ "Drinks overview", Page 47
8.9 Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Requirements
The milk container has been con-
¡
nected.
The milk container has been filled
¡
with sufficient milk.
Place your pre-warmed cup under
1.
the outlet system.
Press repeatedly until the dis-
2.
play shows "Milk froth".
Change the setting if necessary:
3.
To adjust the per-cup quantity,
‒
press .
→ "Adjusting the amount",
Page 54
Press ⁠ .
4.
The milk froth will run out of the
a
outlet system.
Press to stop the dispensing
5.
process.
operation en
. If you
⁠ .
53