Proline PROCD82 Manual page 72

Draining the Water Tank
Drain the water tank after each drying
process. To drain the water tank:
1. Pull the water tank and remove it
carefully.
2. Drain the water in the tank.
3. Place the water tank back into position.
Condensed water is not drinkable!
Never remove the water tank when the appliance is operating!
If you forget to drain the water tank, the appliance will stop during
drying when the water tank is full and the warning indicator light
will illuminate. In this case, drain the water tank and press
resume the drying cycle.
Cleaning the Filter Base
It is recommended to clean the filter base once every three months.
1. If a drying process has been carried out,
open the cover of the filter base and
wait until it cools down.
2. Unlock the 2 filter base locks. Pull out
the filter base.
3. Clean the filter base under running
water. Dry thoroughly.
PROCD82EU IB.indd 69 PROCD82EU IB.indd 69
to
69
20/9/2023 3:47 PM 20/9/2023 3:47 PM