Demo Mode Uu; Turning The Demo Display On And Off - JVC CA-D5T Instructions Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting Auxiliary Equipment
=
BL
=
fat
Li
AUX
RIGHT LEFT
VCR or other equipment
To listen to these sources, press
the AUX button
Now you can plug the AC power cord into the wall outlet, and your CA-D5T is at your command!
DEMO Mode
When the CA-DST is connected to an AC power outlet, a DEMO mode displaying some of the
system's features starts.
The DEMO display cycles through the following items repeatedly.
* Scrolling display of "DEMO MODE".
* Demo of IllumiMagic COMPU PLAY buttons.
¢ Source Indicator.
« DISC-1 to DISC-3 Indicator.
¢« Demo of Live Surround effects and S.E.A effects.
¢ Demo of CD RANDOM PLAY.
* Demo of ACTIVE BASS EXTENSION.
*« Demo of pre-setting of up to 40 FM/AM channels.
The DEMO display stops when the power is turned on. ;
The DEMO display will start again about one minute after the CA-DST is set to STANDBY mode
(the red STANDBY indicator is on).
Turning the DEMO Display ON and Off
The DEMO display can be turned on and off when the system is in STANDBY mode.
To turn the DEMO display off, press the DEMO button while in DEMO mode. The display changes
from the DEMO display to the clock display after "DEMO OFF" light up on the display.
To turn the DEMO display on, press the DEMO button. The display changes from the clock display
to the DEMO display.
Note: The DEMO display automatically starts when the power cord is inserted into a wall outlet. To
stop the DEMO display when the power cord is inserted into the wall outlet, press the DEMO button
to turn the DEMO display off.