Table of Contents
Advertisement
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the AM (MW/LW) Antenna
=
4
=
Cc
Libel
AM antenna wire
If reception is poor, connect the outside antenna.
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM Loop Antenna
Turn the loop until you
have the best reception
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
Connecting the Speakers (Please refer to instructions for speakers as will when you connect speakers.)
pct
ciate
Ce
a
A
A AAAS
AACR RS i rm ai
ep
For each speaker connect one end of the speaker wire to the speaker terminals on the back of the
CA-DST and one end to the speaker.
1. Open each of the terminals and insert the speaker wires firmly (be sure to remove the insulation
at the end of each wire first), then close the terminals.
2.
Connect the red (+) and black (—) terminals of the right side speaker to the red (+) and black
(—) terminals marked RIGHT on the CA-DS5T.
Connect the red (+) and black (—) terminals of the left side speaker to the red (+) and black (—)
terminals marked LEFT on the CA-DST.
Left speaker
Right speaker
-
IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on
the back panel.
Advertisement
Table of Contents
