Tape To Tape Recording (Dubbing); How To Use The Dubbing Button; Recording With The Timer .0 - JVC CA-D5T Instructions Manual

To stop at any time while recording, press the STOP ™ button. The CD Player stops, and then the
Cassette Deck stops about four seconds later.
To cancel Auto Edit, press the & button for disc number being recorded, or press the PROGRAM/
RANDOM button while the CD Player is stopped.
Note: When making SLEEP timer settings while doing Auto Edit recording, set the time so that
there is enough leeway to finish the recording before the power goes off. If the time is set to about
the length of the CD, the power may go off before recording finishes.
Tape To Tape Recording (Dubbing)
Recording from one tape to another is called dubbing.
You can dub tapes simply, with just a single button.
[) When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same.
{J When you want to record both sides of a tape, press the REVERSE MODE to turn Reverse
Mode on. Make sure that the play direction for the tapes in both Deck A and Deck B are in the
forwards » direction, and that the TAPE indicator is also in the forwards ® direction before you
start recording.
Q Itis preferable that the type of tape (Type I or Type II) you record from be the same as the type
you record onto.
How To Use the DUBBING Button
7. insert the source cassette you want to copy from into Deck A for playback.
2. Insert the blank or erasable cassette you want to copy onto in to Deck B for recording.
3. Press the DUBBING button.
Deck A and Deck B will start simultaneously.
Q) If the tape has not been rewound, it is rewound before dubbing starts.
To stop dubbing, press the STOP @ button (or @ button on the Remote Control).
{1 Dolby NR is inactive in dubbing mode regardless of the setting of DOLBY B NR. The dubbed
tape automatically contains the same processing as the source tape.
Q When doing dubbing with the DUBBING button, you can hear Sound Mode effects through the
speakers or headphones. However, the sound is dubbed without Sound Mode effects.
Recording With the Timer
The Cassette Deck can be set to record a tape automatically. This is especially useful for recording
broadcasts when you are not at home, or late at night when you are asleep.
7. insert a cassette for recording into Deck B.
2. Set the ONCE REC Timer, by following the steps in "Setting the ONCE REC (Recording) Timer"
(Page 31).
2
N