Safety Information; Read This First; Symbol Legend; Safety Instructions (General And Specific) - Siemens VersiCharge AC Installation And Operation Manual

Electric vehicle charging station

Hide thumbs Also See for VersiCharge AC:

Table of Contents

VersiCharge™ AC Electric vehicle charging station

SECTION 1

Safety Information

This manual contains instructions for use during installation, operation, and maintenance of the Siemens VersiCharge™ electric

vehicle charging station.

To reduce the risk of electrical shock, and to ensure the safe installation and operation of the Siemens VersiCharge, the following

safety symbols appear throughout this document to indicate dangerous conditions and important safety instructions.

DANGER Hazardous voltage. Will cause death or serious injury. Turn off Power before working

on this equipment. This indicates a situation where the present voltage can cause injury or

death. Extreme caution is required when servicing or installing the equipment referenced.

DANGER Explosion hazard. This equipment has arcing or sparking parts that should not be

exposed to flammable vapors. Use extreme caution and follow instructions carefully.

WARNING! This indicates a situation where failure to follow instructions may be a safety hazard or

cause equipment malfunction. Use extreme caution and follow instructions carefully.

NOTE: This indicates important information for optimal system operation. Follow instructions closely.

Indicates the connection point for ground conductor.

DANGER Hazardous voltage. Will cause death or serious injury. Turn off power to this

equipment before working inside.

• Read this Installation and Operations Manual in its entirety prior to installing, maintaining, servicing, or replacing a Siemens

VersiCharge EV Charging System.

• Permits: Be aware that many areas require special permits and/or utility approvals to install EV charging equipment.

Contact your local electrical inspector's office and your local utility prior to beginning work to understand local requirements.

• Qualified electrician: Because of the inherent dangers of electricity, only a qualified electrician should install, maintain, service,

or replace electrical wiring and connected equipment. For the purpose of this manual, a qualified electrician is someone who is

familiar with equipment hazards of installation, construction, and operation. In addition, this electrician should meet the definition

of a qualified electrician pursuant to the National Electrical Code® (NEC®). Failure to comply with this recommendation may void the

VersiCharge warranty.

• Weatherproof seals: All VersiCharge units are qualified for outdoor use.

Table of Contents