Table of Contents
Advertisement
20. Firmly tighten the six 3/8" x 4" Screws (7) (only
one side is shown).
Press the Left and Right Base Covers (82, 83)
onto the Base (94).
21. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 31 and 32). Note: Extra parts may be
included.
20
82
19
83
7
94
Advertisement
Table of Contents
