8. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the two indicated
Screws (C). Next, lift off the Pulse Crossbar (93).
9. IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown.
Attach the Pulse Crossbar to the Left and Right
Handrails (86, 87) with four #10 x 3/4" Screws
(9) and four #10 Star Washers (92) as shown;
start all four Screws, and then tighten them.
8
C
9
9
92
86
13
Console
Assembly
C
93
93
9
92
87