EK Quantum Magnitude sTRX5 User Manual page 8

STEP 3
Before proceeding with installation, it is mandatory to remove
the protective foil from the backside of the water block.
Placing the Water Block on the Motherboard: Place your
4x
motherboard on an even surface and remove the Mounting
Mechanism from the plastic bag.
Install four (4) Standoffs tightly into the ILM Heat Sink studs by hand.
Using pliers or similar tools is not recommended. After securing the
Standoffs, position the CPU Water Block onto the Standoffs.
STEP 3
STEP 4
Attaching the Water Block: Once you've placed the water block on
4x
the motherboard, insert four (4) mounting springs and M3x9 screws
inside the frame, as shown in the image.
4x
STEP 4
- 8 -