Settingspecialfeatures - Kenmore ELITE 911.49052 Use & Care Manual

T4+i+i+++i;+l i ÷ t+i+i+i+i+iii
OPERATION
SettingSpecialFeatures
Your new touch pad control has
additional features that you may
choose to use. After making your
selection, if you want to change that
setting, follow the steps until the
display shows your choice.
2. (a) Touch the BROIL and OVEN
COOKING TIME pads st the
same time The control display
will show the degrees sign and
i+F_5
(b) Touch the BROIL and OVEN
COOKING TIME pads at the
same time again. This will
change "F" (Fahrenheit) to "C"
(Celsius),
3. Touch the START pad.
÷
The control is set to automatically turn
off the oven after 12 hours baking or 3
hours broiling should you forget and
leave the oven on If you want to
remove this feature:
1.
Touch and hold, st the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows "SF "
2. Touch the DELAY STARTTIME
pad. The display shows "12Shdn"
(12-hour shutoff),
Touch the DELAY START TIME
pad again The display will show
"no Shdn" (no shutoff)
3. Touch the START pad.
Your oven control is set for Fahrenheit
temperature selections. Most recipes
are given using Fahrenheit scale. You
can change this to use Celsius
selections.
1. Touch and hold, atthe same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows "SF"
Your control is set to use the 12-hour
clock. If you prefer to use the 24-hour
Military Time clock or black out the
display:
1. Touch and hold, atthe same
time, the BAKE and BROIL pads
for 3 seconds, untilthe display
shows "SF."
2. (a) Touch the CLOCK pad.
The display shows "12hr."
If this is your choice, touch the
START
pad.
or
(b) Touch the CLOCK pad again
The display will show "24hr"
Example: 5:00 on the 12-hour
clock will show 17:00 hours on
the military clock, If this ts your
choice, touch the START pad,
or
(c) Touch the CLOCK pad again.
The display will show "OFF." If
this +syour choice, touch START
The display will not show time
(The Delay Start Time feature will
not operate.)
÷
25
20P310-3 ENV02 25 + 2/14_3, 2:13 PM