Kenmore ELITE 911.49052 Use & Care Manual page 11

÷
OPERATION
OvenControl, Clock and Timer
(cont.)
This feature allows you to adjust the
tone volumes to a more acceptable
volume. There are three possible
volume levels.
1. ouch the BAKE and
BROIL pads at the same
time for 3 seconds, until
the display shows "SF"
Touch the LIGHT pad
The display will show
"2 BEEP" This is the
middle volume level
Touch the LIGHT pad
again. The display will
show "3 BEEP." This is
the loudest volume level
Touch the LIGHT pad
again, The display will
show "1 BEEP." This is
the quietest volume level.
For each time the level
is changed, a tone will
sound to provide an
indication of the
volume level,
3. Touch the START pad to
activate the level shown.
If the control beeps while the display
is showing "F" and a number or letter
such as "F4" or "Fd," there may be
a problem with the control or oven.
Touch the CLEAR/OFF pad. If the
function code repeats, disconnect
all power to the oven for at least 30
seconds and then reconnect the
power, Try setting the function again.
If the code repeats again, write down
the flashing code and call for service.
Tell the technician what code was
flashing
÷
11
20P310-3 ENv02 11 ÷ 2J1,4_, 2:12 PM