Table of Contents
Advertisement
Types of Sub Codes
A Bats)ian me laceit(elatsy
(olan =e li lale mal are!
In addition to the audio signals used for recording
purposes, the DCC system is provided with
a function
for writing signals called "sub codes" which come In
handy for searching tracks during playback, editing
and recording.
Start markers and track numbers
When writing the sub codes, check that the accidental
erasure prevention tab on the DCC tape for recording
is set to the recording position.
Recording and marker editing are not possible on
prerecorded DCC music tapes.
| indicates the start of a
track,
Type of sub code
Main function
Description
+
KE
Start markers:
; Used to find where each track
+: They are written for about 3 seconds at the
| Each of these
begins.
start of each track.
| (only on DCC tapes for recording)
Gap between tracks
Track numbers:
Each of these
; represents a track.
Used when skipping to a
particular track and starting
; Playback from that track
30-32
i
mz
Track 1
| Track 2
|
fj
|
Start marker
Start marker
Start marker
(approx. 3 seconds)
|
Tale
In the case of a DCC tape for recording,
these numbers are automatically written at
} the start marker positions.
32
Advertisement
Table of Contents
