Table of Contents
Advertisement
23
Analog Cassette Tape Playback
Changing the tape run direction (reverse function)
SIDE AB
by
Normally, the both sides playback mode ( =—~D) is
set.
Side A:
Side B: ~—a
Rewinding or fast forwarding the tape
In the stop mode:
The tape travel direction
REW
FF
differs for sides A and B.
a4
The one-side playback mode cannot be set.
When playback is started from side B. the tape counter
display is counted down.
Locating a particular position on the tape
(search function)
" When one of these buttons is pressed during
playback, the tape will be rewound or fast forwarded
only for as long as the button is kept depressed.
The playback sound cannot be heard during the
search.
Finding the start of tracks (TPS function) )
During playback, the start of a particular track can be
located and that track played back.
(TPS:
Tape Program Sensor)
Finding the start of the next track
During playback:
Each time this button is
pressed, the tape jumps to
the start of the next track,
and playback is resumed.
SKIP
In the stop mode:
SKIP
Each time this button is
" "pressed, the tape jumps to_
the start of the previous
track, and the tape stops.
TPS may not operate property in the following
circumstances:
e@When there is noise in the gaps between tracks
When the unrecorded blanks between tracks are
4 seconds or less in length
When tracks have sections with particularly jow recording __
Each time this button is
pressed, the tape jumps to
the start of the next track,
and the tape stops.
In the stop mode:
SKIP
—)
Finding the start of the previous track
During playback:
Each time this button Is
pressed, the tape jumps to
the start of the previous
track, and playback is
resumed.
SKIP
(replay function)
During playback:
The tape is returned to the
start of the track now
being played, and
playback is resumed.
PLAYs
Listening again from the start of the track now being
~~
Teveis or silent passages
When the play time js fess than 10 seconds from the start
of the track being heard to the start of the next track
@When the tape was recorded with fade-in and fade-out
effects for the intervals between tracks
played
Advertisement
Table of Contents
