White W2900 SUPERLOCK Instruction Book page 60

Use for decorating edges of collars, cuffs, pockets, etc.
1. PEARLS ALONG AN EDGE:
Set for left needle (remove right needle) 3-thread overlock.
Set tensions as follows:
Left needle: 4
Upper looper: 1
-
2
Lower looper: 7
-
8
SEW:
• Remove regular foot; replace with pearl foot.
• Remove stitch finger as you did for a rolled edge.
• Swing cutter away to lowest position, close front covers.
• Raise the needle to its highest position.
Place pearls in the channel on the right side of the foot
with 2" of pearls extending behind foot.
• Take one stitch with the hand wheel to secure the pearls.
• Follow edge of fabric along fabric guide.
Sew pearls on edge of fabric.
• Return cutter to original position when finished.
2. PEARLS SEWN WITH A FLAT LOCK STITCH:
FABRIC:
Medium weight woven
2 or 4 mm pearls
Set for a 3-thread flat lock, left needle only. See pg. 28
SEW:
• Remove regular foot; replace with pearl foot.
• Insert small stitch finger.
• Swing cutter away to lowest position.
• Raise needle to it's highest position.
• Place pearls in channel on right side of the foot with 2"
of pearls extending behind foot.
• Take one stitch with the hand wheel to secure the pearls.
Sew pearls on with the left needle just catching the fold
of the fabric.
• Pull flat lock open.