Power Supply & Charging - Modecom FREEWAY MX3 User Manual

5" GPS Navigation
SN Component Explanation
4. Pawerkay Powering on/ off the device or enter sleep
mode
2 Stylus slot Location of the stylus
Playing sounds (such as navigation prompt
a * "Speaker tones, music, elc.)
4 Indicator ight Indicating the operating state of extemal
power supply
5 Earphone jack Connected with the stereophone
T-Flash card slot T-Flash card inside.
Communicating with PC via MINI USB
7 MINI USB port cable, or connected to TMC (option), or used
as the charging port
8 Light sensor For automatic backlight adjustment
9__ Reset key Restart the system
1.2 Power Supply & Charging
Charge the GPS navigator fully with the charger before first use,
1.2.1 Power Supply
The FreeWAY can be powered by the built-in battery or
external power supply.
When the GPS navigator is unconnected to the chargaz j i s Pow-
ered by the Li-polymer battery. The battery capacity icon REM in the
system main interface shows current residual battery capacity.
When the GPS navigator is connected to the charger, it is powered
by external power and the battery is charged.
[Attention] The GPS navigator adopts internal non-removable Li-
polymer battery. To avoid battery rupture, explosion, release of haz-