Modecom FREEWAY MX3 User Manual page 49

5" GPS Navigation
4. After communication, unplug the MINI USB cable.
7.9.2 MS ACTIVESYNC
1. Tap [BZ in the system interface to enter USB Option as shown
below. Bi
Usb Option
Mass Storage
Select MASS ACTIVESYNC and tap | * to save the setting.
2. Install the application Mobile Device in a drive of PC. Then the
following icon. [] . . . . . . . will appear in the drive selection
3. Connect the MINI USB terminal of the USB cable to the MINI
USB port of the GPS navigator and the standard USB terminal to the
USB Host port of PC.
4. After the PC finds new hardware, double click the Mobile Device
drive in the selection area to enter the memory of GPS navigator for
data transmission
5. After transmission, unplug the USB cable.
[Attention] For data safety back up the navigator data
[Note] If MASS STORAGE is selected while the GPS navigator is
connected with PC, other operations will be suspended.