Table of Contents
Advertisement
Available languages
Available languages
5" GPS Navigation
2. Tap bill in the system interface to enter USB Option as shown
below.
usb Option
Mass Storage
Select MASS STORAGE and tap | to save it
3. Connect the MINI USB terminal of the USB cord to the MINI USB
port of the GPS navigator and the standard USB terminal to the USB
Host port of PC. Then the PC will recognize the navigator and prompt
the following interface. To disconnect the navigator from PC and enter
USB charging mode, you may select
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the FREEWAY MX3 and is the answer not in the manual?