Modecom FREEWAY MX3 User Manual page 9

5" GPS Navigation
3. Failure to power on/off the GPS navigator by pressing the power key
[Note] Restarting the system by pressing the reset key will result in
loss of unsaved data. Please backup your data regularly.
1.3.3 Fixing the GPS Navigator with Mounting Kit
The mounting kit is composed of a cradle and a bracket as shown
below. To use the GPS navigator in an automobile, fix the mounting kit
on the dashboard under the front windshield.
'Step 1: Install the cradle
onto the bracket via the four
Step 2: Use the peden
two screws to
adjust the angle
and direction of
the PND Step 3: Pull the switch to make
flat the rubber sheet at the
bottom and then place the kit
in a proper position in the car
and pull the switch back to fix
the kit.
[Note] Do not place the GPS navigator in positions obstructing the
driver's vision. Do not place it without fixing or in the place of air bag
or the area after the air bag is inflated.
1.3.4 Using T-FLASH Card
Copy mapping applications, map data and media files in a T-FLASH
card. Insert the card in the corresponding slot.
[Note]
1. Do not take out the T-FLASH card while a navigation program is
being run or a media file is being played.
2. To avoid drop or crash of the T-FLASH card, do not exert heavy
pressure on it or bend it.