System Info; Fm Transmitter - Modecom FREEWAY MX3 User Manual

5" GPS Navigation
Tap OK to execute calibration or Cancel to cancel calibration and
go back to the setting interface.
Tap OK, and the following calibration interface is prompted. Click
the center of cross cursor with the stylus and the cursor shifts from the
center, upper left, lower left, upper right and lower right to finish the
calibration and the interface will be closed automatically to go back to
the setting interface.
7.7 System Info
Tap [EJ in the setting interface to view the system information in-
terface.
7.8 FM Transmitter
FM transmitter realizes transmission of audio signals of the GPS
navigator to radio sets. Adjust the emission frequency of the GPS
navigator the same as that of the receiving frequency of the radio,
and sounds of the navigator will be output by the amplifier system of
the radio sets. To use the highest possible quality FM transmitter
system in the first instance, please select the radio frequency of the
free" - which is not occupied by another radio station frequency.
In addition, while the FM transmitter unit must be connected to the
charger. Power cord serves as the transmitting antenna to the
FM transmitter.
www.modecom.eu