Sony Digital8 DCR-TRV120 Operating Instructions Manual page 50

Playing back a tape with digital effects
During playhack, you can process a scene using tile digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial
until the desired digital effect indicator (STILL, FLASH, LUMI. or TRAIL)
flashes.
(2) Press the SEL/PUSH EXEC dial.
The digital efDct indicator lights up and the bars appear. In the STILL or
LUMI. mode, the image where you press the SEL/PUSH EXEC dial is stored in
memory as a still image.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect fimction, see page 37.
DIGITAL
EFFECT
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
• The digital effect f\metion works only tbr tapes recorded in the Digital8 [) system.
• You cannot process externally input scenes using the digital effect f\mction.
• You cannot record images that you have processed using the digital effect function
with this camcorder. To record images that you have processed using the digital effect
f\mction, record the images on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital eft_ct f\mction are not output through the _ DV IN/
Ol IT jack.
When you set the POWER switch to OFF (CHARGE) or stop playing back
The digital effect f\mction is
automatically
canceled.
50