Sony Digital8 DCR-TRV120 Operating Instructions Manual page 10

Step 1 Preparing the power supply
Install tile battel T pack to use yore camcorder outdoors.
Slide the battery pack down until it clicks.
To remove the battery pack
Slide tbe battery pack out in tbe ctilection oftbe arrow wbile pressing } BATT
RELEASE down.
}BATT
RELEASE
After installing the battery pack
Do not carry your camcorder by holding the battery pack. If you do so, tile battel T pack
may slide off your camcorder unintentionally, damaging your camcorder.
10