Table of Contents
Advertisement
-- Playback - Basics --
Playing
back a tape
You can monitor the playback picture on the LCD screen. If you close tile LCD panel,
you can monitor tile playback picture in tile viewfinder. You can control playback using
the Remote Commander supplied with yotu camcorder.
(1)Install the )ower source and insert the recorded tape.
(2) Set the POWER switch to VTR while pressing the small green button. The
video control buttons light up.
(3) Open the LCD panel while pressing OPEN.
(4) Press _
to rewind the tape.
(5) Press _
to start playback.
(6) To adjust the volulne, press either of the two buttons on VOLUME. The
speaker on your camcorder is silent when the LCD panel is closed.
To stop playback
Press m.
1
When monitoring
on the LCD screen
You can turn the LCD panel over and move it back to the camcorder
body with the LCD
screen facing out.
÷
24
Advertisement
Table of Contents
