Table of Contents
Advertisement
Endless Pools
Hydrostride
Installation
™
®
Section 2:
CHOOSING A LOCATION FOR THE HYDROSTRIDE
Hydrostride
The Hydrostride can fit into virtually any swimming pool. For optimal use, it's recommended that the Hydrostride is installed
no closer than 18" (46cm) to any adjacent wall. In addition, 18" (46cm) of clearance is recommended at the rear of the
Hydrostride. These recommendations allow ample space for stepping on and off the unit. The water depth where the Hydro-
stride is installed should be based upon the height and preference of the end user. It's recommended that the waterline on the
user is higher than the waist, but lower than the shoulders. The treadmill belt sits approximately 4-5/8" (12cm) above the pool
floor. This MUST be considered when determining the appropriate water depth.
Fig. 2.1
6
Advertisement
Table of Contents
Need help?
Do you have a question about the HYDROSTRIDE and is the answer not in the manual?