General Power Tool Safety Warnings - DNIPRO M CSD-36X Original Operating Instructions

en
Dear Buyer!
Thank you for purchasing the DNIPRO M
power tool, which is distinguished by its
innovative design and high-quality con-
figuration. The power tool you purchased
belongs to a range of devices that com-
bine modern design solutions and high
reliability. We hope that our products will
become your indispensable assistant for
many years.
1. GENERAL POWER TOOL
SAFETY WARNINGS
WARN ING!
Read all safety warnings, instruc-
tions, illustrations and specifica-
tions provided with this power tool.
Failure to follow all the instructions
below may result in electric shock,
fire, and/or serious personal injury.
Save all warnings and instructions for fu-
ture reference.
The term "electric power tool", "pow-
er tool" or "electric machine" in these
warnings refers to your network-operat-
ed electric power tool or an accumula-
tor-operated (cordless) power tool.
Safety at the workplace
– Keep the workplace clean and properly
lit. Disorder and poor lighting can lead
to accidents.
– Do not use the power tool in an explo-
sive environment, such as near flamma-
ble liquids, gases or dust. Power tools
generate sparks that can ignite dust or
fumes.
– Do not allow children and unauthorized
persons to the place of operation of the
electric machine. Distraction can cause
you to lose control of the power tool.
Electrical safety
– When working with a power tool, do
not touch grounded surfaces such as
pipes, radiators, electric stoves and re-
frigerators. There is an increased risk of
electric shock if your body is grounded.
– Do not expose power tools to rain or
moisture. When water gets into an
electric tool, the risk of electric shock
increases.
4
Personal safety
– Be careful, watch your actions and use
common sense when working with
power tools. Do not use a power tool
if you are tired or under the effect of
drugs, alcohol or medication. Even the
slightest inattention when operating a
power tool can result in serious injury.
– Use personal protective equipment. Be
sure to use safety glasses. Using appro-
priate protective equipment, such as
respirators, non-slip safety shoes, and a
helmet or hearing protection, reduces
the likelihood of injury.
– Take precautionary measures in case of
unexpected start-up. The switch must
be in the off position before connect-
ing to a power source or accumulator,
while lifting or carrying the power tool.
Do not keep your finger on the switch
when carrying the power tool, and do
not connect it to the power source
while the switch is on.
– Remove any adjustment key before
turning on the power tool. A key left on
a rotating part can cause injury.
– Maintain stability and balance during
work. This will be a guarantee of reli-
able control of the power tool, in par-
ticular in unpredictable situations.
– Do not wear loose clothing or jewel-
ry while working. Keep hair and cloth-
ing away from moving parts of the pow-
er tool. Loose clothing, jewelry or long
hair can be caught in moving parts of
the power tool.
– If means are available for connecting
suction or dust collection devices, con-
nect and use these devices correct-
ly. The use of such devices reduces the
risks associated with the presence of
dust.
– Do not allow excessive self-confidence
that arises from regular use of power
tools. Self-confidence causes a careless
attitude to the implementation of safe-
ty principles and even ignoring them.
Any carelessness when operating a
power tool can result in serious injury in
a matter of seconds.
EU-CSD0923001-0923002