Scope Of Supply; Intended Purpose And Appearance Of The Electrical Tool; Technical Specifications - DNIPRO M CSD-36X Original Operating Instructions

5. SCOPE OF SUPPLY

Сordless screwdriver
1
CSD-36X
2 USB Type-C cable
Attachment (bit) PH1 + PH2
3
110 mm
Attachment (bit) PZ1 + PZ2
4
110 mm
5 Attachment (bit) HEX4 65 mm 1 pc.
6 Attachment (bit) PH0 65 mm
7 Attachment (bit) SL4 65 mm
8 Attachment (bit) T10 65 mm
9 Attachment (bit) T20 65 mm
The original safety and
10
operating instructions
11 Covering
12 Packaging
6. INTENDED PURPOSE
AND APPEARANCE OF THE
ELECTRICAL TOOL
Intended purpose
Accumulator screwdriver (hereinafter re-
ferred to as "power tool") is intended for
screwing and unscrewing screws, bolts,
and nuts. All other uses are prohibited.
The electric tool has a plastic case with
a comfortable rubberized handle, which
ensures a reliable hold during work. The
flashlight is built into the body and turns

7. TECHNICAL SPECIFICATIONS

Parameters
Rated voltage
Rated accumulator capacity
Accumulator type
Rated charging voltage
Rated charging current
Maximum electrical torque
Maximum manual torque
The number of rotation speeds
Idle speed n0
HEX chuck type
EU-CSD0923001-0923002
on when the screw-in or unscrew-out
switches are pressed, which adds con-
venience in low-light conditions. A USB
1 pc.
Type-C connector is built into the case,
1 pc.
which is designed for connecting a USB
cord and charging the power tool.
1 pc.
The principle of operation of the power
tool: when the switch is pressed, it turns
1 pc.
on.
Appearance (Fig. 1)
1 pc.
1 Handle
1 pc.
Charger cord connector (USB
2
1 pc.
Type-C)
1 pc.
3 Charge indicator
4 Unscrewing switch
1 pc.
5 Screwing switch
1 pc.
6 Flashlight
1 pc.
7 Chuck
WA R NI NG!
LLC "DNIPRO M" constantly works
on improving its products and in
this regard reserves the right to
make changes to the appearance,
design, equipment and content of
the original instructions for safety
and operation of the power tool,
without notifying consumers. All
possible changes will be aimed only
at the improvement and moderniza-
tion of the electric tool.
Unit of Measure
V
mAh
V
Ah
N·m
N·m
min
-1
mm
en
CSD-36X
3.6
850
Li-Ion
5
1
1,2
8
1
280
6.35
7