Storage And Transportation; Disposal; Company Service Centers Of Dnipro M Llc; Declaration Of Compliance - DNIPRO M CSD-36X Original Operating Instructions

en
11. STORAGE AND
TRANSPORTATION
It is recommended to store the electric
tool indoors, at a temperature from +5 °C
to +40 °C and a relative humidity of no
more than 80%.
Keep the power tool, safety and operat-
ing instructions and accessories in their
packaging. In this case, all necessary in-
formation and details will always be avail-
able.
If you have stored or transported the
power tool at a temperature lower than
that at which it is intended to be used,
you must make sure that there is no con-
densate on the power tool. If condensate
forms on the components and parts of
the power tool, its further preparation for
work or operation is prohibited until the
condensate dries completely.
It is forbidden to transport power tools
with installed accessories. To transport
the power tool, use packaging that pre-
vents damage to the power tool or its
components during transportation.
12.

DISPOSAL

Do not dispose of power tools with
household waste!
Power tools that have been decommis-
sioned are subject to separate storage
and disposal in accordance with environ-
mental legislation.
13. COMPANY SERVICE CENTERS
OF DNIPRO M LLC
For information on the location of DNI-
PRO-M service centres, please contact
your seller or an authorised representa-
tive of DNIPRO M LLC.
10
14. DECLARATION OF
COMPLIANCE

DECLARATION OF COMPLIANCE

EC DECLARATION CONFORMITY
Type: CORDLESS SCREWDRIVER
Model: CSD-36X
The above product(s) correspond to:
2006/42/ЕС Directive Machinery
2014/30/EU Electromagnetic Compati-
bility Directive
2011/65/EU RoHS Directive
The following harmonised standards
were applied:
EN 62841-1:2015/AC:2015; EN 62841-2-
2:2014/AC:2015;
EN IEC 55014-1:2021; EN IEC 55014-
2:2021;
Name and address of technical docu-
mentation holder EU authorized repre-
sentative:
Dnipro-M stores sp. z o.o. (Dnipro-M
stores LLC)
Adama Branickiego Str., 21 lok. U3, 02-
972 Warsaw, Poland
Manufacturer:
DNIPRO M LLC, І. Mazepy Str., 10, Kyiv,
01010, Ukraine. Made in P.R.C.
Importer and authorized representative
in EU: Dnipro-M stores sp. z o.o.
Adama Branickiego Str., 21, lok. U3, 02-
972 Warsaw, Poland.
Board Chairman:
Zviagintseva Tetiana
22.02.2023
EU-CSD0923001-0923002