Table of Contents
Advertisement
4.7.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see Operating the product -
Programmes.
For products without drum cleaning, follow the below steps
Select
Additional Water
without pre-wash. Set
programme
on the drum cleaning agent which can be provided from authorized
Apply this procedure
services.
starting the programme, put 1 pouch of special drum cleaning agent (if the special
agent could not be supplied, put max. 100 g of powder anti-limescale) into the
main wash detergent compartment (compartment no. „2"). If the anti-limescale is in
tablet form, put only one tablet into the main wash compartment no. „2". Dry the
inside of the bellow with a clean piece of cloth after the programme has come to
an end.
C
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
4.7.3 Cleaning the body and control panel
Wipe the body of the product with soapy water or non-corrosive mild gel
detergents as necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
Washing Machine / User's Manual
or
auxiliary functions. Use a Cottons
Extra Rinse
the temperature to the level recommended
without any laundry in the product.
After every washing make sure that no foreign
substance is left in the drum.
If the holes on the bellow shown in the figure is
blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the
drum. Clean the stains on the drum surface by using
cleaning agents for stainless steel.
Never use steel wool or wire wool. These will damage
the painted, chromated and plastic surfaces.
to clean the drum:
Before
43 / EN
Advertisement
Table of Contents
