Connecting The Drain Hose To The Drain - Grundig GWN 59673 C User Manual

4.4.5 Connecting the drain hose to the drain

• Attach the end of the drain hose directly to waste water drain, lavatory or
bathtub.
A
CAUTION:
water discharge. Moreover, there is risk of scalding due to high washing temperatures! In
order to prevent such situations and make sure that the product and the machine performs
water intake and discharge processes without any problem, fix the drain hose securely.
• Connect the drain hose to a minimum height of 40 cm and a maximum height of
100 cm.
• In case the drain hose is elevated after laying it on the floor level or close to the
ground (less than 40 cm above the ground), water discharge becomes more
difficult and the laundry may come out excessively wet. Therefore, follow the
heights described in the figure.
• To prevent the waste water to go back into the product again and to ensure easy
drainage, do not immerse the end of the hose into the waste water or do not
insert it into the drain for more than 15 cm. If it is too long, cut it short.
• The end of the hose should not be bent, it should not be stepped on and the
hose must not be pinched between the drain and the machine.
• If the length of the hose is too short, use it by adding an original extension hose.
Length of the hose may not be longer than 3.2 m. To avoid water leak failures,
the connection between the extension hose and the drain hose of the product
must be fitted well with an appropriate clamp as not to come off and leak.
14 / EN
Your drain house will be flooded if the hose comes out of its housing during
Washing Machine / User's Manual