Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sentera Controls DSMFM-2R
Summary of Contents for Sentera Controls DSMFM-2R
- Page 1 DSMFM-2R MULTIFUNCTIONAL DUCT TRANSMITTER Mounting and operating instructions...
-
Page 2: Table Of Contents
OPERATIONAL DIAGRAMS WIRING AND CONNECTIONS MOUNTING & OPERATING INSTRUCTIONS IN STEPS OPERATING INSTRUCTIONS VERIFICATION OF INSTALLATION TRANSPORT AND STORAGE WARRANTY AND RESTRICTIONS MAINTENANCE MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 2 - 90 www.sentera.eu back to the table of contents... -
Page 3: Safety And Precautions
In case there are any questions that are not answered, please contact your technical support or consult a professional. MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 3 - 90 www.sentera.eu... -
Page 4: Product Description
DSMFM-2R MULTIFUNCTIONAL DUCT TRANSMITTER PRODUCT DESCRIPTION The DSMFM-2R are multifunctional duct transmitters which measure temperature, relative humidity and CO concentration level. Based on the temperature and relative humidity measurements, the dew-point temperature is calculated. They are Power over Modbus supplied and all parameters are accessible via Modbus RTU. -
Page 5: Operational Diagrams
Modbus RTU communication, signal /B Pin 6 Pin 7 Ground, supply voltage Pin 8 8 mm 8 mm 8 mm 8 mm 24 VDC MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 5 - 90 www.sentera.eu back to the table of contents... -
Page 6: Mounting & Operating Instructions In Steps
(if necessary), see Fig. 1 and Fig. 2 below. Fig. 1 Mounting dimensions With flange Without flange 86,8 34,5 Fig. 2 Mounting position Correct Incorrect MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 6 - 90 www.sentera.eu back to the table of contents... - Page 7 Crimp the RJ45 cable and plug it into the socket, see Fig. 4 and section “Wiring and connections”. Fig. 4 Wiring and connections MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 7 - 90 www.sentera.eu back to the table of contents...
-
Page 8: Operating Instructions
‘boot mode’ is automatically activated and the firmware can be updated. NO T E Make sure the power supply does not get interrupted during “bootload” procedure, otherwise you risk losing unsaved data. MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 8 - 90 www.sentera.eu back to the table of contents... -
Page 9: Verification Of Installation
In case of heavy pollution, clean with a non-aggressive product. In these circumstances the unit should be disconnected from the supply. Pay attention that no fluids enter the unit. Only reconnect it to the supply when it is completely dry. MIW-DSMFM-2R-EN-000 - 28 / 11 / 2023 9 - 90 www.sentera.eu...
Need help?
Do you have a question about the DSMFM-2R and is the answer not in the manual?
Questions and answers