Page 1
1 9 8 8 t h e s o u n d High-Performance Car- amplifier owner‘s manual X-120.2 D X-80. 4 D designed and engineered by audio system Germany...
Page 2
- Wired Remote Control RTC (optional) - High-Power-Input (normally originial radio) with automatically „Turn-On“ - Adaptercable HLAC and rca hi (optional) X-80.4 d - 4-Channel High-Power Full-Range Digital amplifier - Stable into 2 ohm stereo per channel and 4 ohm bridged mode...
POWER CONNECTIOn X-120.2 D / X-80.4 D ATTENTION: 1. Battery disconnection First disconnect the power supply of the +12V vehicle. This works out the best by removing the ground cable of the battery. 2. Ground connection Connect the GND (ground) connection of the amplifier with the car chassis.
speaker connection X-120.2 D 1-Channel Bridged speaker sin ce 198 8 impedance th e so un d 4 ~ 8 Ohm 2-Channel Stereo speaker sin ce 198 8 impedance th e so un d 2 ~ 8 Ohm CH 1 CH 2 Tri-Mode speaker...
TROUBLE SHOOTING This power amplifier is featured with a efficient protection system to prevent any damages like over-heating, overvoltage, short-circuit and DC at the loudspeaker output. Occuring an error the protection-LED will light in red. In order to check the problem, first turn down all levels of the head unit, afterwards turn it off.
180(W) x 45(H) x 150(L) mm ----------------------------------------------------------------------- si n c e 1 9 8 8 t h e s o u n d Audio System Germany F all torstraße 6 - 76707 Hambrücken designed and engineered by audio system Germany...
Need help?
Do you have a question about the X-80.4 D and is the answer not in the manual?
Questions and answers