Table of Contents
Advertisement
HOW TO USE THE SOUND SYSTEM WITH A
BLUETOOTH DEVICE
1. Place or hold your Bluetooth-enabled device
near the console.
2. Turn on your device's Bluetooth setting.
3. Pair your device to the console.
Press and hold the Bluetooth button on the con-
sole's speaker grill for 3 seconds. The Bluetooth
speakers will enter pairing mode. When your
device and the console pair successfully, the audio
from your device will play through the console's
speakers.
Note: The console can save eight devices in its
memory. If you have previously paired your device
to the console, you can simply press the Bluetooth
button to connect your device to the console.
4. Erase the console's device memory if
necessary.
If you need to erase all the Bluetooth-enabled
devices saved in the console's memory, press and
hold the Bluetooth button for 10 seconds.
HOW TO USE THE SOUND SYSTEM WITH AN
AUDIO CABLE
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the
jack on the console and into a jack on your personal
audio player; make sure that the audio cable is fully
plugged in. Note: To purchase an audio cable, see
your local electronics store.
Next, press the play button
on your personal audio
player. Adjust the volume
level using the volume
increase and decrease
buttons on the console or
the volume control on your personal audio player.
HOW TO ADJUST THE CUSHIONS
The treadmill features cushions that reduces the
impact as you walk or run on the treadmill.
Remove the key from the console and unplug the
power cord.
For a more fi rm walking platform, turn the cushion
knob (D) a half turn counterclockwise until you feel
it lock into place. For a less fi rm walking platform,
turn the cushion knob a half turn clockwise until you
feel it lock into place. Note: The faster you run on
the treadmill, or the more you weigh, the firmer the
walking platform should be.
27
D
Advertisement
Table of Contents
