Table of Contents
Advertisement
11. With the help of a second person, hold the con-
sole assembly (H) near the Handrails (74).
Connect the Upright Wire (83) to the con-
sole wire (J). The connectors should slide
together easily and snap into place. If they do
not, turn one connector and try again.
Then, remove any wire ties (K) from the Upright
Wire (83).
12. Attach the console assembly (H) to the Handrails
(74) with four 5/16" x 2" Screws (2) and four
5/16" Star Washers (8); start all four Screws,
and then tighten them. Be careful not to
pinch the wires (J).
Insert the wires (J) into the top of the Right
Upright (84).
11
H
J
83
74
K
12
74
J
8
84
2
12
H
74
8
2
Advertisement
Table of Contents
