Table of Contents
Advertisement
9. Set the console assembly (H) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(I). Then, remove the Pulse Crossbar (80).
Next, identify the Left and Right Trays (94, 101).
Attach the Trays to the console assembly (H)
with eight #8 x 1/2" Screws (11). Do not over-
tighten the Screws.
10. IMPORTANT: To avoid damaging the Pulse
Crossbar (80), do not use power tools, and do
not overtighten the #10 x 3/4" Screws (6) or
the 5/16" x 2" Screws (2).
Orient the Pulse Crossbar (80) as shown. Attach
the Pulse Crossbar with two 5/16" x 2" Screws
(2), two 5/16" Star Washers (8), and two #10 x
3/4" Screws (6); start all four Screws, and then
tighten them.
Then, tighten the other two 5/16" x 2"
Screws (2).
9
11
101
I
80
I
10
6
2
8
2
11
11
11
94
H
I
80
2
6
8
2
Advertisement
Table of Contents
