General Safety Instructions; Definition Of Qualified Personnel - Weh TK16 H2 Operating Instructions Manual

AE Operating instructions
1�4

General safety instructions

Î
Always comply with all applicable local, national and international requirements,
stipulations, decrees, laws, standards, provisions, directives, norms, regulations,
prohibitions and instructions as well as all applicable industrial, quality and technical
standards. In particular, make sure that you and all users comply with the applicable
requirements related to occupational health and safety as well as product safety
requirements and that all required permissions, certificates and approvals have been
obtained.
Î
These operating instructions should be provided to anyone responsible for the instal-
lation, operation and maintenance of this WEH
Î
Contact WEH before using the WEH
instructions are unclear in any way.
Î
Take appropriate safety measures if operating conditions exist that could endanger
the user.
Î
In case of any damage that may affect the proper functioning of the WEH
not use the WEH
WEH Product may only be performed by WEH.
®
Î
Comply with the assembly data indicated in these operating instructions. Tightening
with higher torques/assembly turns can result in damage or even fractures when the
system is pressurized.
Î
Do not use any auxiliary materials or cleaning agents other than those indicated in
these operating instructions. Using other auxiliary materials or cleaning agents may
cause damage to the WEH
- WEH is not responsible for damage caused by external forces or other external
influences.
- Proper transport and storage of the WEH
1�5

Definition of qualified personnel

- Qualified personnel, as defined by these instructions, are persons who, based on
their professional training, their knowledge (including the relevant standards and
regulations), experience and manual skills, can independently assess and properly
perform assigned work tasks (in conjunction with WEH
independently recognize and prevent potential dangers at an early stage.
Page 8
MD-10286-L51-R1.0.0-07
Product until the situation has been clarified. Disassembly of the
®
Product or to downstream components.
®
Product.
®
Product if the instructions in these operating
®
Product is assumed.
®
Product, do
®
Products) and can thus
®