Installation; Safety Instructions For Installation - Weh TK16 H2 Operating Instructions Manual

AE Operating instructions

7. INSTALLATION

Please note: Subsequent mentions of descriptions and position numbers refer to
Chapter 3. Product overview / product description on page 10.
7�1

Safety instructions for installation

Î Check the information provided in these operating instructions and the label on the
WEH Product. The information must conform to your application.
®
Î Only connect the WEH
Î Check the WEH
you should detect anything wrong with the WEH
Replace the WEH
Î Remove transport securing devices (such as protection caps) before installing the
WEH Product. Transport securing devices are designed to protect the product and
®
the ports during transport and storage. The transport securing devices are not, for
example, designed to withstand pressure or to be used as plugs.
Î
Ensure that the system is depressurized. Installation must only be effected in de-
pressurized condition.
Î
Before installation, check if the counterparts are designed to withstand the assembly
data (see Chapter 7. Installation) that WEH determined for this WEH
Note: The assembly data (torques, assembly turns etc.) are values which apply exclu-
sively to the components delivered by WEH.
Î
Before commissioning, make sure that the used hoses and the breakaway coupling
are also suitable for the application (e.g. filling with cryogenic medium).
Page 16
MD-10286-L51-R1.0.0-07
Product to faultless connections.
®
Product for transport damages, contamination and other damage. If
®
Product or send it to WEH for maintenance.
®
Product, it may no longer be used.
®
®
Product.