Looking After Your Machine - Zanussi ZF 56/45 Instructions For The Use And Care

Looking' after your machine
Defrosting
The fridge compartment is automatically
defrosted.
Frost is automatically eliminated from
the cooling plate at the back of the
fridge compartment every time the
motor compressor stops.
The defrost water drains out through a
trough into a special container on the
back of the appliance where it
evaporates.
The defrost, water drain hole should be
cleaned at regular intervals. To do this,
use either a straw, pipe cleaner or thin,
flexible wire (e.g. net curtain wire
without the end hooks) and insert it into
the drain hole to a maximum of 6".
The freezer compartment however, will
become progressively covered with frost.
This frost, which acts as an insulator and
thus prevents the cold from reaching the
food, should be removed whenever the
frost exceeds 5mm (1/4 inch).
NEVER USE A SHARP METAL
TOOL TO SCRAPE OFF FROST FROM
THE INTERIOR AS YOU COULD
DAMAGE IT.
The frost should be removed with the
special plastic scraper provided.
15