Zanussi ZF 56/45 Instructions For The Use And Care page 18

Replacing the interior light bulb
Should the interior light in the fridge fail
to work, first switch off and puli out the
mains plug, and then replace the bulb as
follows:
Remove the bulb housing cover, situated
underneath the light/thermostat
mechanism, by unscrewing the screw and
by sliding it out (see Fig. 6).
Unscrew the lightbulb by turning in an
anticlockwise direction.
Replace with a 10W bulb.
Replace the bulb housing cover by
sliding back in.