Installation - Zanussi ZF 56/45 Instructions For The Use And Care

Table of Contents

Advertisement

Installation
WARNING
IF YOU ARE DISCARDING AN OLD
APPLIANCE THAT HAS A LOCK OR
CATCH ON THE DOOR, PLEASE
ENSURE THAT IT IS MADE
UNUSABLE TO PREVENT YOUNG
CHILDREN BEING TRAPPED INSIDE.
Depending upon the position which you
choose for your appliance, you may wish
to reverse the way in which the door
opens. To do this, refer to instructions on
page 19.
For this appliance to work efficiently, it
should be located away from heat
sources, e.g. cookers, radiators, boilers,
direct sunlight etc. This also includes
locations or rooms where the ambient
temperature reaches above 32 degrees C
or drops below 16 degrees (e.g.
conservatories).
You should also ensure that air can
circulate freely around the back and the
top of the cabinet. There must also be at
least 50mm (2") distance between the top
of the cabinet and any overhanging
kitchen furniture. Ideally, the appliance
should not be positioned beneath
overhanging furniture. There should also
be a gap of 25mm either side of the
appliance. Do not obstruct the space
underneath. The back of the cabinet may
be placed close to the wall but must not
touch it. DO NOT install in places with
restricted ventilation.
Adjust the level of the appliance by
screwing out the adjustable foot, or feet,
at the bottom of the cabinet using your
fingers or a spanner, (see fig. 2).
Make sure that the cabinet is upright.

Advertisement

Table of Contents
loading

Table of Contents