Nilfisk-Advance Advance SC370 Service Manual page 19

Service Manual- SC370
8. Remove the safety switch lever assembly (Figure 9).
9. Remove 2 screws on the PCB fixing plate (Figure 10).
10. Take out the Dashboard (Figure 11).
11. Disconnect all harnesses and terminals connected to the Dashboard (Figure 12).
Installation
Assemble components in reverse order of disassembly.
Safety switch lever
Figure 9
Take out the Dashboard
Figure 11
Remove 2 screws
Figure 10
Disconnect the harnesses
Figure 12
04 Control system 18