Nilfisk-Advance SC351 Operator Poster

Hide thumbs Also See for SC351:

Download this manual

Unplug battery

charger.

Fill machine with

appropriate solution

(temperature should not exceed

130° F).

Get familiar with the

control panel.

Choose program for the

type of work to be

performed.

SC351 How To

Prepare for use

Wrap cord accordingly.

Inspect ball float cage.

Enable push-button and

lever to engage

brush/pad holder then

release.

Press the solution flow

control switch.

Inspect squeegee,

brushes or pads then

install.

Lower recovery tank lid.

Turn machine on.

Begin scrubbing.

Need help?

Do you have a question about the SC351 and is the answer not in the manual?

Page 1 SC351 How To Prepare for use Inspect squeegee, Unplug battery brushes or pads then charger. install. Wrap cord accordingly. Lower recovery tank lid. Inspect ball float cage. Fill machine with appropriate solution (temperature should not exceed 130° F). Enable push-button and Turn machine on.
Page 2 SC351 How To Store the Machine Inspect and wash, Rinse and wash vacuum grid and Empty recovery tank recovery tank with automatic shut-off float. and solution tank. clean water. Inspect squeegee, rinse Remove, clean and Take squeegee off and and replace if needed.
Page 3 SC351 How To Daily, Weekly and Occasional Maintenance Check each battery cell’s water level (does Clean squeegee daily not apply to gel Clean brush daily. by removing debris. batteries). Charge batteries daily. Every 6 Months Screw and nut tightening check.